Standing Rigging 101: What to Check Before it Fails
- Episode 072 Your Pocket Sailing Instructor podcast
- Released: June 3, 2024
- Duration: 28 min 15 sec
“Your standing rigging works hard every time you sail – give it a proper look before it gives you a problem.” ~ Sailing According to Coach Penny
Standing rigging is easy to take for granted because much of it simply sits there doing its job – until something starts to wear, crack or loosen. In this episode, I dig into the standing rigging checks sailors should be thinking about as part of routine boat care.
WHAT YOU’LL LEARN
- Make standing rigging inspection part of routine maintenance
- Become familiar with how your own rig normally looks
- Watch for visible changes, wear or potential trouble spots
- Know when a concern deserves professional rigging advice
Your sailboat’s standing rigging is quite literally what keeps the mast standing, so it deserves more than a quick glance at the beginning of the season. Standing rigging generally includes your shrouds, stays, wire or rod rigging, turnbuckles, shackles, chainplates and the various pins and fittings that connect everything together. These components are constantly subjected to tension, vibration, salt, moisture and movement while you’re sailing. Most of the time they quietly do their job in the background, which makes them very easy to forget about — right up until something goes wrong! A rigging failure can lead to losing the mast, so regular inspection should be part of your normal sailboat maintenance routine.
At a minimum, I like to give the rig a thorough inspection at the beginning and end of every sailing season, but I also keep an eye on it throughout the year. Before heading out, get into the habit of simply looking up! Are the shrouds and stays properly tensioned? Is anything noticeably looser than it was before? Are cotter pins and split rings still where they’re supposed to be? After heavy weather, an accidental gybe or any event that has placed unusual loads on the rig, it’s worth taking another careful look. And don’t forget that much of the rig is above your head. A proper periodic inspection means checking the masthead, spreaders and tangs as well as everything you can easily see from deck level. Birds love hanging out on top of masts or on the spreaders, so keeping an eye on whatever they’ve been playing with up there is important.
When inspecting wire rigging, look carefully for broken strands, kinks, corrosion, rust staining and anything that simply looks different from the last time you checked. Pay particular attention to the areas where the wire enters a swaged terminal, because problems can develop at these transition points. Check turnbuckles for corrosion, cracking, damaged threads or signs that they’re working themselves loose, and make sure clevis pins, cotter pins and other retaining hardware are secure. Chainplates also deserve close attention. Look for corrosion, cracks, movement, distortion or water intrusion where they pass through the deck. Chainplates are a very common place for water intrusion created soft spots on your deck. Stainless steel can sometimes look perfectly good on the surface while corrosion is developing somewhere less obvious, so suspicious rust staining or unexplained movement is worth investigating rather than ignoring.
The important thing is to inspect the entire system, not just the wire itself: forestay, backstay, upper and lower shrouds, terminals, turnbuckles, toggles, chainplates, clevis pins, cotter pins, mast tangs and spreaders all work together to support the mast. If you have a furling headsail, remember that the forestay is largely hidden inside the furler, making it particularly easy to overlook. And while regular owner inspections are important, they aren’t a replacement for having an experienced rigger inspect the system periodically — especially on an older boat or if you don’t know the rigging’s history. If you find cracking, broken wire strands, significant corrosion, damaged terminals or anything else that makes you question the integrity of the rig, don’t wait for it to fail to find out whether it was serious. Get it checked before heading back onto the water.
Cheers!

If you enjoyed this episode, you’ll love these too!
- Episode 068: Chartering in Croatia: Interview with Graham Toews
- Episode 077: Creating an Itinerary! The Basic Steps
- Episode 080: Three Generations, One Boat
Share with a Friend
Resources
Yearly Boat Check Checklist
Download this 1-page PDF which includes a yearly boat systems checklist.
Download –> Yearly Boat Check Checklist
About Penny Caldwell
Penny Caldwell is a Canadian sailing educator, Sail Canada Instructor Evaluator, marine consultant, and host of the Your Pocket Sailing Instructor podcast. With nearly three decades of teaching experience, she is passionate about helping sailors of all skill levels build confidence, develop practical seamanship skills, and enjoy a lifetime on the water. Through her articles, podcast, instructor development programs, consulting, and sailing adventures, Penny shares real-world knowledge that makes sailing safer, more enjoyable, and more accessible for everyone.
Continue the Conversation
Sailing is a lifelong learning journey, and some of the best ideas come from fellow sailors. Have a question about this topic, or a tip you’d like to share? Leave a comment below—I read every one and enjoy hearing about your experiences on the water!

One Comment